MJE

...WLAN Repeater? I purchased a Siements WLAN 108 repeater and cannot get it to work no matter what I do. I decided I would reset it to the factory settings and start over again and there appears to be no hard reset option.

john m

Sqltutorials.info is your gateway to the best
sites on the Internet for sql tutorials!
Looking for Computers, Technology, or Domain
Names? Browse our recommended resources or
just try the Sqltutorials.info search.
http://sqltutorials.info/

kyrrian

You can reset the device as follows:
Via Reset button:
The reset button is located behind the small opening on the underside of the device.
Please note:
While the device is rebooting the reset button does not function. To trigger the restart or reset function, please wait until the WLAN LED has stopped flashing.
Restart function: Press the reset button for longer than 1 second but less than 5 seconds to reboot the device. This does not affect the configuration settings. The WLAN LED flashes while the device restarts. This may take several minutes.
Reset function: Press the button behind the small opening on the underside of the device for at least 5 seconds to return all settings to the factory settings.Warning: This will clear all the configuration settings you have made. Updated firmware will not be affected.

Via User Interface: You can reset the Gigaset WLAN Repeater 108 to the factory settings. You should do this before making the device available to others or exchanging it through the dealer.
Select under "Advanced Setup" - "Save & Restore" the option "Reset configuration to factory default settings" and click on OK.A window will appear prompting you to confirm the procedure.
Please bear in mind that when the device is fully reset, all configuration settings will return to the factory settings. This means that you will have to completely reconfigure the Gigaset WLAN Repeater 108. This does not affect firmware loaded at an earlier stage.

gigaset.siemens.com